|
|
Post by graffitizone on Sept 16, 2008 14:42:02 GMT -5
Hey fellow ballers maybe you can help me out I just recently got a virtue board for that Shocker I got from Bradly from Counter Addiction Paintball I know how to set the dewell on the board but I was trying to get some kinda suggestion on what I should set it to. I was wondering if you had any suggestions please hit me back up and let me know. You can either hit me up here or you can go to our website which is teamgraffiti.net and let me know if you choose to go to our website then you will have to register under xtremephaze.com. We are under the local team we are Team Graffiti. I would certainly appericiate and thanx to everybody for helping out with this peace out to everybody.
|
|
pete
Rookie
Posts: 35
|
Post by pete on Sept 16, 2008 15:29:44 GMT -5
when i had a virtue board in my sft i was running it at 17ms and it worked great. u prolly can drop it in warmer weather but i just kept it at 17.
|
|
|
|
Post by graffitizone on Sept 17, 2008 1:59:01 GMT -5
What air pressure was you running or what would you recommend? I may go ahead and run at that and if one other question someone else recommend 15 if I was going to set it at that what air pressure would you recommend? Also thanx for the help I certainly appericiate it.
|
|
pete
Rookie
Posts: 35
|
Post by pete on Sept 17, 2008 8:32:01 GMT -5
I really dont know about pressure i didnt have a guage i just set dwell to 16-17 and set my fps. once your reg breaks in you should be shooting +/- 3 fps with decent paint. i shot a shocker for years like that with no chops and no FSDO and it was pretty accurate too. But it will very with diff. guns u will just have to try to mess around with the settings. check this out: www.pbnation.com/showthread.php?t=936933And if u havent seen it befor this is the Smart Parts bible: www.zdspb.com |
|
|
|
Post by graffitizone on Sept 17, 2008 14:09:56 GMT -5
Alright then I checked them out I may do just that if I have any other problems with trying to setting it I will let everybody on here know. And maybe I can get someone to set it for me I shouldn't though. Also if you could give me another recomendation if I was to set the fps to 250-270 whatwould you recommend setting the dwell to?
|
|
pete
Rookie
Posts: 35
|
Post by pete on Sept 17, 2008 18:02:38 GMT -5
if u could shoot consistantly in the 250-270 range than i would just up the hpr. i really dont like messing with dwell too much. the solenoid on the shockers are a little finnicky and u will encounter FSDO alot of the time.
|
|
|
|
Post by graffitizone on Sept 18, 2008 1:35:24 GMT -5
Alright well thanx for the help there Pete I will try to do what you suggested and I will see what happens I would also like to say thanx for all the info. ;D
|
|
